Product Information

MiniBle S Standard Version;

Material:SUS 316 Medical Grade Stainless Steel
Net Weight:75-85g
Dimension:Ø2.55x3cmØ2.55x3cm
Intake Port:M22 female、M24male

Water Output Port:N/A
Suggested Water pressure:>1.5kg/cm^2
Warranty:One Year
Parts and Accessories:MiniBle S Aerator Body, Rubber Washer Screen, M24 Rubber Washer, M24 – M22 Male Thread Adapter, User Manual, Dedicated M3 Screwdriver, Tweezer

 

 

Notices

  • Please install thread with care.。

  • Cautious with your hands when using hot water as MiniBle S is made by SUS 316 Medical Grade Stainless Steel.

  • It is microbubbles'main feature to enhance the detergency of water. If the water from water outlet is not drinkable, please do not drink it directly.

  • To prolong the service life, please clean the product at least once a month. To check the detailed cleaning method, please see Cleaning And Maintenance. (The actual cleaning frequency and service life may vary with different water quality.)

  • As MiniBle S saves water by 30-50%, the using experience may need to be adapted.

Detailed Description-

Water Description
The water pressure of MiniBle S is 1.5kg/cm^2, product can be used when meeting one of the conditions listed below:

  1. Has pressurized motor at home

  2. The floor you are at is above five floors apart from the top floor 

Intake Port Description
This product applies to M22 male and M24 female faucet. If the dia of your faucet is not M22 male, please purchase a right adapter.
After measuring, if find out you need M22 male to G1/2 male adapters, you can buy them at our official online shop.

 

 

 

  Installation Guideline

 

 

 

 

​FAQ-

How to remove the original aerator from the faucet?
You can remove the aerator with wrench. Please contact us if doesn't work.

MiniBle Adapter Sticks. What can I do?

You can use a ten – dollar coin, level the groove on the adapter, and remove it.

   The MiniBle I bought does not fit the faucet at home. What can I do?
   You can buy the correspondent adapter and watch the guideline video as reference.
   After measuring, if find out you need M22 to 16mm male adapters, you can buy them at our official online shop.

When it leaks from the connected part after installing?

  1. Please check if the installing steps are right, or whether you have put the filter gasket and gasket. To please specially check the adapter as it also needs gasket between adapter and faucet. To see full installation guideline: Detailed Description > Installation Guideline

  2. If you have followed the installing steps, but still cannot tight the aerator or it leaks, please contact us, and we will offer you a new gasket.

 I cannot tight the aerator as the head of MiniBle adapter is too short.
   If the faucet at your home is cylindrical M24 female, you need a prolonged aerator. You can purchase it at our official online shop.   

I installed MiniBle, but why can't I see milky white color?

  1. Please check whether the water pressure is right! (MiniBle Q should be above 1kg/cm^2)

  2. Observation Method: the angle of the light will affect the microbubble. We recommend that you use a transparent container to observe.

  3. Make sure MiniBle air hole is clear: the air intake will affect microbubble. We recommend that you clean MiniBle first, then it will perform well.

   If the above steps cannot solve the problem, please contact us.

 

   Why some taps can produce milky white color, while some cannot?
   Different pipelines will affect the amount of water and water pressure. You can change another faucet to install MiniBle.

   Why water was milky white color before, but it is not now?
   The scale may block MinlBle’s air hole. You can wash MiniBle and use it again. If it still does not work, please contact us.

   After installing MiniBle, the hot water is not hot enough or is unstable.

  1. Please check if the installing steps are right, or whether you have put the filter gasket and gasket. To please specially check the adapter as it also needs gasket between adapter and faucet.
    To see full installation guideline: Detailed Description > Installation Guideline

  2. If you have followed the installing steps, but still cannot tight the aerator or it leaks, please contact us, and we will offer you a new gasket.

   After installing MiniBle, the hot water is not hot enough or is unstable.
   You can fix the problem by adjusting the water heater. The suggested steps are as following:

  1. Turn the water output of the water heater to the utmost.

  2. Turn the faucet to the hottest and water output to the utmost. Then, turn the water output to the one you used to.

  3. Turn the faucet to the hottest and water output to the utmost. Then, adjust the water heater to the temperature you used to.

   After adjusting the water heater, you can turn to the hottest temperature when using.

 

Cleaning and Maintenance-

​   It is suggested to wash MiniBle S at least every month. Suggested steps: remove the rubber washer screen, unscrew the water hole, then clean every part with toothbrush with soft brush.If you MiniBle S has heavy scale, it is suggested to add citric acid into boiled water, then soaks MiniBle S.(Cleaing Guideline) Notes: The gasket, and rubber washer screen cannot soak into the citric acid. (The actual cleaning frequency and service life of product may vary with the water quality.)

 

​Contact Us

If having any other questions, you can contact us with:
Email:​info@herhers.com.tw
Tel:07-3590981 (10:00~18:00)
FaceBook : MiniBle迷你波微氣泡起波器
Offical Line:@herhers
Service Hour:Mon. – Fri. 10:00-18:00

已加入購物車
網路異常,請重新整理