Product information


MiniBle Q Bi-thread Version (M22 Female & M24 Male applicable)

Material: SUS316 Medical Grade Stainless Steel, ABS, Brass
Net Weight: 81.5±1g
Dimension: D23.8xH51.6±0.5mm
Intake Port: M22 Female & M24 Male
Operating Water Flow : 9~16 L/min
Warranty: 6 months
Parts and Accessories: MiniBle Q Swivel Aerator Body, Rubber Washer*2


Notices

*Please install the thread carefully.
*The suggested temperature of using MiniBle Q is between 10-60℃ as the core is made by ABS.

*The main feature of microbubble is to enhance the detergency of water. If the water from your faucet outlet is not drinkable, please do not drink it directly.

*To increase the service life, please clean the product at least once a month. To check the detailed cleaning method, please see Cleaning and Maintenance. (The actual cleaning frequency and service life may vary depending on different water quality.)

*As MiniBle Q has water-saving feature, the using experience may need to be adapted.

 Detailed Description

▼ Operating Water Flow
The suggested operating water flow for MiniBle Q is 9-16 L/min

The way to measure your flow rate
1. Find a container
2. Remove your aerator
3. Turn the tap / faucet to the maximum degree
4. See how long it takes to fill up the container with water

For example: If it takes 3.6 second to fill up a 600ml container with water, filling up a 10L container requires 1 minute. 

▼ Intake Port
This product applies to both M24 female and M22 male faucet. If the diameter of your faucet outlet is neither M24 female nor M22 male, please purchase a right adapter.

 

 


▼Installation Guideline

M22 male faucet

1. Remove your original aerator (with wrench)

2. Put on the thin rubber washer

3. Attach the aerator to your faucet

 

M24 female faucet

1. Remove your original aerator (with wrench)
2. Put on a thin rubber washer
3. Put on a thick rubber washer
4. Attach it to your faucet

 FAQ

Q1:How to remove the original aerator from the faucet?

A:You can remove the aerator with wrench. Please contact us if it doesn't work.

Q2:The MiniBle I bought does not fit my faucet. What can I do?

A:You will need to purchase a right adapter. If you have any questions about the diameter of your faucet outlet, please do not hesitate to contact us. We will help you find the most suitable adapter.

Q3:I installed MiniBle, but why can’t I see milky white water?

A:

  1. Please check whether the operating water flow is right! (MiniBle Q should be 9-16L/min)
  2. Observation Method: the angle of the light will affect the microbubble. We recommend that you use a transparent container to observe.
  3. Make sure the air hole of the MiniBle is unblocked: the amount of the air intake will affect microbubble. We recommend that you clean MiniBle first to see whether it works. ※To check the detailed cleaning method, please see Cleaning and Maintenance.(If the above steps cannot solve the problem, please contact us!)

Q4:Why some taps can produce milky white color, while some cannot?

A:Different pipelines will affect the amount of water and water pressure. You can change another faucet to install MiniBle.

Q5:Why water used to be milky white color, but it is not now?

A:The limescale may block air hole of MiniBle. You can remove MiniBle to wash it and install it again. If it does not work, please contact us. We will help you deal with the problem.

Q6:Why it leaks from the connected part after installing?

A:

  1. Please check whether you install it right or whether you have put the rubber washer screen and rubber washer. While checking the adapter, please make sure that it also needs rubber washer between adapter and faucet.(To see full installation guideline: Detailed Description > Installation Guideline)
  2. If you have followed the steps for installation and still cannot attach the aerator tightly or deal with the leak problem, please contact us. We will offer you a new rubber washer.

Cleaning and Maintenance

It is suggested to clean MiniBle Q every 2 weeks or 1 month. After removing it, you can gently brush the rubber washer screen with a soft toothbrush. If it is hard water, you can soak the core into 60℃ water with Citric Acid or limescale remover for 15 minutes to enhance the detergency. (The actual cleaning frequency and service life of product may vary depending on water quality.)

Contact us

If having any other questions, you can contact us through:
Email: info@herhers.com.tw
Tel:07-3590981 (10:00~18:00)
FaceBook: MiniBle迷你波微氣泡起波器
Offical Line@:@herhers
Service Hours: Mon. – Fri. 10:00-18:00

 

已加入購物車
網路異常,請重新整理